Liquid Oil Capsule Filling Machine For Filling Pallet and Oil

 

Applying:

 

This liquid capsule filling machine is used for filling the liquid oil, such as, fish oil, vitamin E oil, evening primrose oil seed oil and multivitamin preparation with the powder and pallet into the hard empty capsule.It is our latest product,mainly export to USA

The empty capsules are loaded into the capsule hopper where they are fed into the magazine. Capsules initially enter the magazine un-oriented. From the magazine, the capsules enter the sorting block where they are properly oriented (smaller end on the bottom). The capsules are then separated by vacuum. On next fibre sensor checking station, segments holes are checked by fibre sensors to know if the capsules are missing in the segments. When the capsules are moved to filling station, ceramic pumps will fill product into capsule body, specify ceramic pump will not work while the segments holes to fill is missing with capsule body. Unseparated capsules will be rejected on next rejecting station to dust collector. Capsule body and cap are then joined together on closing station. The finished capsule is discharged as the final step.

 

Features:

 

1.This liquid capsule filling machine has been improved the inner design turret, and imports beeline bearings for each machine from Japan directly, so that it can be sure a longer usage-life and precision of machine. 

2.The working station cam runs under the good lubricating condition, and maintains the inner lubrication of cam slot to a full extent, increasing the pressure pulverization oil pump, thus extends the operation life of the spare parts. 

3.Single movement for both upper and lower segments with two-lip seal provide a much better sealing performance. 

4. It is controlled by the PLC and touch screen, has a stepless timing with the frequency-conversion, the numberal showing makes an easy operation and clear appearance. 

5. It has a protector equipment for the operator and the machine, it has an automatic pause equipment when it is lack for the material, It has steady and safe working, it is the best choice for the hard capsule made factories

 

Parameters:

 

Machine Model	NJP-260
Max Output	260 capsules/minute
Suit for Capsule Size	00#-5#,
Filling rate	>99.5%
Machine size	1100×860×1970 mm
Machine weight	800 kg
Power	380V,220V 50HZ 7.5KW
Noise	<75db

Why choose our capsule filling machine?

 

We have more than 15 years experience for producing this machine,our capsule filling machine quality and precision has reached the international level,compare the Bosch capsule filling machine,our price is very cheap,but the quality and precision is only different a little.we have USA engineer can offer you the in time technical support.We can offer you different capacity oil liquid filling machine,powder pellet filling capsule machine.Our machine mainly export to the USA，

we also can offer you the capsule band sealing machine.We can offer the machine capacity from 200pcs per min to 7500pcs per min

 

                                                                        NJP-600 Liquid capsule filling sealing machine line

 

 

 

Applying:

This capsule filling machine is used for filling the powder or pellet into the capsule.

Working Principal:

Capsule Part: Loading the empty capsule into capsule hopper, the empty capsule then get into capsule sowing plate, automatic make U turn, divide the top and body of capsule

when pass by vacuum, automatic filling while come into dosage tray, it has automatic reject function if the capsule is flat or its top and body can not be divided. After that, automatic locking and output the final products.

Powder or pellets part: Loading the medicine into medicine hopper, then the medicine automatic come down, (the machine stop automatically while no medicine), dosage tray

going filling for five times, make the medicine save into medicine pole. Finally, medicine is filled into empty capsule.

 Futures:

 1) nice appearance, exquisite workmanship, ease operation.

2) Stowage seat and measuring plate are designed as one unit to make measuring plate and stowage rod without deviation phenomenon, avoid friction phenomenon between stowage rod and measuring plate, improve its precision highly, expand the machine's life .

3) Ineligible capsule can be eliminated automatically(qualified rate not included), the medicine in the capsule can be recycled and be reused, increase greatly economic benefit.

4) easy dismantling , installation and clean, different mould can be replaced manually on the same machine

5) Dust collector and vacuum pipe as well as waste air pipe are installed in the inner of the machine , avoid the air pipe becoming hard, broken and leakage , it is more convenient to clean the operating platform.   The medicine can not contact with organic material meet the GMP the requirement

6) The cap of stowage rod is made of stainless steel to replace original plastic cap to void breaking phenomenon; decrease the screws and caps on the platform

7)Adopt the PLC,touch screen,the touch screen can set the password.Automatically set the parameter.printing data,etc function

 Can automatically alarm,automatically stop when the machine encounter a breakdown or lack material,the wearing parts are all imported

Add the mold blowing air,sucking air function,insure the mold hole without dust when fill the capsule

Parameters:

Model	Capacity ( capsule /min)	Capsule Size	Filling rate	Power	Vacuum pump	Noise	Dust collector	Oversize and weight of machine
NJP-200	200	No.00-5	=>99%	3.5kw	0.02-0.06Mpa	<80dBA	700m3/H, 2X105pa, 350*700*1000mm, 40kg	870*670*1900mm, 700kg
NJP-400	400	No.00-5	=>99%	5kw	0.02-0.06Mpa	<80dBA	700m3/H, 2X105pa, 350*700*1000mm, 40kg	870*670*1900mm, 700kg
NJP-800	800	No.00-5	=>99%	5.5kw	0.02-0.06Mpa	<80dBA	700m3/H, 2X105pa, 350*700*1000mm, 40kg	970*820*1900mm, 900kg
NJP-1200	1200	No.00-5	=>99%	7kw	0.02-0.06Mpa	<80dBA	700m3/H, 2X105pa, 350*700*1000mm, 40kg	1020*860*1970mm, 1000kg
NJP-1500	1500	No.00-5	=>99%	7kw	0.02-0.06Mpa	<80dBA	700m3/H, 2X105pa, 350*700*1000mm, 40kg	1500*1040*1970mm, 1300kg
NJP-2500	2500	No.00-5	=>99%	7kw	0.02-0.06Mpa	<80dBA	700m3/H, 2X105pa, 350*700*1000mm, 40kg	1500*1040*1970mm, 1500kg
NJP-3800	3800	No.00-5	=>99%	7.6kw	0.02-0.06Mpa	<80dBA	700m3/H, 2X105pa, 350*700*1000mm, 40kg	1500*1450*2100mm, 2000kg
NJP-7500	7500	No.00-5	=>99%	13.5kw	0.02-0.09Mpa	<80dBA	900m3/H, 2X105pa, 350*700*1000mm, 40kg	1700*1450*2150mm, 3800kg

                                            

 

 

 

 

 

 

 

 

 

 

Priljubljena oznake: Liquid Oil Capsule Filling Machine For Filling Pallet and Oil, China, manufacturers, suppliers, factory, made in China